Specifications




Base (1×) and (current) maximum speeds by generation
Generation Base Max
(Mbit/s) (Mbit/s) ×
1st (CD) 1.17 65.6 56×
2nd (DVD) 10.57 253.6 24×
3rd (BD) 36 504 14×
4th (AD) ? ? 14×
Capacity and nomenclature
Designation Sides Layers
(total)		 Diameter Capacity
(cm) (GB)
BD SS SL 1 1 8 7.8
BD SS DL 1 2 8 15.6
BD SS SL 1 1 12 25
BD SS DL 1 2 12 50
BD SS TL 1 3 12 100
BD SS QL 1 4 12 128
CD–ROM 74 min SS SL 1 1 12 0.682
CD–ROM 80 min SS SL 1 1 12 0.737
CD–ROM SS SL 1 1 8 0.194
DDCD–ROM SS SL 1 1 12 1.364
DDCD–ROM SS SL 1 1 8 0.387
DVD–1 SS SL 1 1 8 1.46
DVD–2 SS DL 1 2 8 2.66
DVD–3 DS SL 2 2 8 2.92
DVD–4 DS DL 2 4 8 5.32
DVD–5 SS SL 1 1 12 4.70
DVD–9 SS DL 1 2 12 8.54
DVD–10 DS SL 2 2 12 9.40
DVD–14 DS DL/SL 2 3 12 13.24
DVD–18 DS DL 2 4 12 17.08
DVD–R 1.0 SS SL 1 1 12 3.95
DVD–R (2.0), +R, –RW, +RW SS SL 1 1 12 4.7
DVD-R, +R, –RW, +RW DS SL 2 2 12 9.40
DVD–RAM SS SL 1 1 8 1.46
DVD–RAM DS SL 2 2 8 2.65
DVD–RAM 1.0 SS SL 1 1 12 2.58
DVD–RAM 2.0 SS SL 1 1 12 4.70
DVD–RAM 1.0 DS SL 2 2 12 5.16
DVD–RAM 2.0 DS SL 2 2 12 9.40

Comments

Post a Comment

Popular posts from this blog

Surface error scanning

Image
This section needs expansion . You can help by adding to it. ( July 2020 ) Optical media can predictively be scanned for errors and media deterioation well before any data becomes unreadable. A higher rate of errors may indicates deteriorating and/or low quality media, physical damage, an unclean surface and/or media written using a defective optical drive. Those errors can be compensated by error correction to some extent. Error scanning software includes Nero DiscSpeed , k-probe , Opti Drive Control (formerly "CD speed 2000" ) and DVD info Pro for Windows, and QPxTool for cross-platform. Support of error scanning functionality varies per optical drive manufacturer and model. Error types edit There are different types of error measurements, including so-called "C1" , "C2" and "CU" errors on CDs, and "PI/PO (pairity inner/outer) errors" and the more critical "PI/PO failures" on DVDs. Finer-grain error measurements on CD...
Read more

Design and technology

Image
The encoding material sits atop a thicker substrate (usually polycarbonate) that makes up the bulk of the disc and forms a dust defocusing layer. The encoding pattern follows a continuous, spiral path covering the entire disc surface and extending from the innermost track to the outermost track. The data are stored on the disc with a laser or stamping machine, and can be accessed when the data path is illuminated with a laser diode in an optical disc drive that spins the disc at speeds of about 200 to 4,000 RPM or more, depending on the drive type, disc format, and the distance of the read head from the center of the disc (outer tracks are read at a higher data speed due to higher linear velocities at the same angular velocities). Most optical discs exhibit a characteristic iridescence as a result of the diffraction grating formed by its grooves. This side of the disc contains the actual data and is typically coated with a transparent material, usually lacquer. The reverse side of a...
Read more